Brother HL-1800 series - Manual (Page 132)

5-12
☛ ☛ ☛ ☛ 1.
Press the Cover Release Button, and then open the Front Cover.
☛ ☛ ☛ ☛ 2.
Pull out the Drum Unit Assembly.
!
Caution
• We recommend that you put the drum unit Assembly on a piece of
disposable paper or cloth in case you accidentally spill the toner.
• To prevent damage to the printer from static electricity, do not touch the
electrodes shown below.
☛ ☛ ☛ ☛ 3.
While pressing the Lock Lever, pull the Toner Cartridge out of the Drum Unit
Assembly.
!
Caution
Handle the toner cartridge carefully. If toner spills on your hands or clothes,
wipe or wash it off immediately with water.
✒ ✒ ✒ ✒ Note
Get rid of the used Drum Unit according to local regulations. Make sure that
you seal up the Drum Unit tightly so that toner powder does not spill out of
the unit.
Handle the Toner Cartridge carefully. If toner spills on your hands or clothes,
wipe or wash it off immediately with water.