Size error t2, Size error dx, No dx tray – Brother HL-1800 series User Manual
Page 141: Dx lever error, No tray1, Clean drum unit, Size mismatch
Advertising
6-2
SIZE ERROR T2
Set the correct paper that you want to use into the Tray2, or load the
same size paper that you selected in the current driver setting.
kind of paper can I use?” in Chapter 1.
SIZE ERROR DX
Specify the printable paper size.
NO DX TRAY
Install the Duplex Tray correctly.
DX LEVER ERROR
Set Paper Adjustment Lever for duplex printing.
NO TRAY1
Install the standard paper cassette (Tray 1) into the printer.
CLEAN DRUM UNIT
Clean the corona wire. See
"Cleaning the Corona Wire" in Chapter 5.
SIZE MISMATCH
1.
Put in the correct size of paper.
2.
Select the correct size of paper on the Control Panel.
Advertising