Brother HL-1800 series - Manual (Page 28)

1-18
☛ ☛ ☛ ☛ 3.
Place paper in the Multi-purpose Tray so it touches the back of the tray and
remains below the limit mark.
Fig. 1-13
✒ ✒ ✒ ✒ Note
When you place paper on the Multi-purpose Tray, note the following:
• If you will be printing on paper that weighs more than 135 g/m
2 (36 lbs),
use the Face Up Output Tray.
• Insert the leading edge of the paper first and push it gently into the tray.
• If you use pre-printed paper in the Multi-purpose Tray, the paper should
be inserted top edge first with the printed side face up.
☛ ☛ ☛ ☛ 4.
Press and slide the Paper Width Adjuster on the right-hand side to fit the paper.
Fig. 1-14