Binatone D33 - Manual (Page 7)

Page 7
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
SYSTEM MENU
1. Under On-Hook status
2. Press
PGM/ESC
to enter into the menu
3. Press or to select one of the functions below that you wish to change and then press ENTER
.
SET LCD CONTRAST
1. Press or to adjust the LCD contrast from 1 to 8
2. Press
PGM/ESC
or
ENTER
to set and exit menu
Please note, if the display is faint, try adjusting the contrast as explained above.
SET OFF TIME - To limit Call Duration
1. Press to set off time from 00 minute to 99 minutes
2. If you use this function we suggest you set it to more than 5 minutes. “Emergency calls are also
affected by this function.”
3. Press
PGM/ESC
or
ENTER
to set exit menu
SET DATE AND TIME
1. Press to modify the flashing number
2. Press to change the flashing digit
3. Press
PGM/ESC
or
ENTER
to set and exit menu
SET AREA CODE
Set this to your local area code. When you receive a local call, your Caller ID will log the full number
including the area code. When phoning back from the Caller ID log, the local area code will not be
dialled.
1. Input the area code
2. Press
ENTER
LONG PREFIX
Not used.
BROWSE DIALLED NUMBERS
Allows you to view and dial previously dialled numbers.
1. Press or key to select the “number”
2. Press or key to browse the number and press ENTER
which ever dialling out and press
DELETE
key can delete the number
SET DISPLAY LANGUAGE
1. Press to choose the language of LCD among English, Netherlands, Deutsch, Francais, Svenska,
Espanol, Italiand or Danish
2. Press
PGM/ESC
or
ENTER
to set and exit menu
D33 User Guide-June03 6/13/2003, 3:06 PM Page 7 Adobe PageMaker 6.5C/PPC