GBC 150 Creasematic - Manual (Page 2)

Crease Matic 150
The new Crease Matic 150 is a fully programmable card creaser developed
specifically for the short to medium run digital print market. Designed and
Manufactured in the UK. It bridges the gap between desk top card creases and
suction fed models. Over 2000 sheets per hour can be stream-fed by hand – simply
advance the sheet to the input rollers and the Crease Matic takes over.
Up to 9 creases per sheet can be programmed for card sizes A5 to SRA3 and 6 -page
A4. There is a memory function which holds up to 5 jobs, and a resetable sheet
counter.
The creasing rule and matrix system prevents ink or toner cracking when folding
digitally printed card. A slide-out, reversible creasing matrix allows card up to 350gsm
to be creased.
The Crease Matic 150 is quiet in operation and the drive motor shuts down if not
used for a period of time.
The floor-standing unit has wheels for ease of mobility and storage, and has a
footprint of 103cm x 47cm. Operator loading height is 88cm, giving the operator a
convenient loading position for feeding.