GBC BM 200 Bookmaker - Manual (Page 25)

2
25
Changing settings
If stapling was On, the first choice will be Off and vice
versa.
Select On or Off with the [arrow] button and press the
[OK] button.
selecting stapling On or Off, continues
Trimming
Adjusting the cutting margin
Select Trim and press the [Change] button. Select
Trim length and press the [OK] button. Press the [+]
or [-] buttons to fine adjust in increments of 0.5 mm or
0.02 inches. The trimmed booklet size and waste are
displayed. Press the [OK] button to confirm.
selecting trimming On or Off
If trimming was On, the first choice will be Off and vice
versa.
Select On or Off with the [arrow] button and press the
[OK] button.
From the Ready screen, select Trim and press the
[Change] button.