GBC 44DT - Manual (Page 15)

Page 5-3
Operating Instructions
44DT
F
ILM AND
T
AKE
-
UP
T
ENSION
A
DJUSTMENT
K
NOBS
Fig. 5-4. Tension Adjustment Knobs.
Allows the operator to increase or decrease film web
and release liner tension as needed to reduce curl
and wrinkles.
C
ONTROL
P
ANEL
Fig. 5-5. Control Panel.
Display
The LCD shows the following information.
READY – Appears when the heat pressure rollers
have reached the set temperature. It flashes when
the heat is out of range.
TEMPERATURE – Displays the programmed
temperature setting. Also displays current
temperature when the
MEAS. button is pressed.
SPEED – Displays the set speed.
Functions
The following describes the buttons on the control
panel. Refer to Fig. 5-5.
BOTTOM HEAT – Press the ON button to turn on the
bottom heat pressure roller heater. Press the
OFF
button to turn it off. When the bottom heat is turned
on, an LED illuminates below the
OFF button.
Tension Adjustment
Knobs
TEMP SPEED
BOTTOM
HEAT
FAN
STOP
RUN
TEMPERATURE
REVERSE
MEAS.
OFF
ON
9
SPEED
°F
220
READY
LED
Display