GBC AutoUltima Pro HiRes - Manual (Page 6)

6
AutoUltima Pro - Setup
Laminator comes pre-Ioaded with 75mic film, Approximately 90 metres.
1 In back of machine turn on power.
Power light LED front control panel
lights up.
4 Insert and secure feed tray into
position.
Enter
2 First time only, scroll up or down
to select language setting, then
press "Enter". To reset language,
hold down both scroll buttons for
5 seconds, select language then
press enter.
3 Open tray for normal operation. For
longer paper or banners close tray.
Tray
5 Adjust "Paper Side Guides" to fit
document(s). Side
Guides
AutoUltima Pro - Setup
Laminator comes pre-Ioaded with 75mic film, Approximately 90 metres.
3 Laminated document(s) will stack
in Exit Tray. Lamination will stop
when job is complete.
1 Adjust paper side guides and place
document(s) in feed tray. Side
Guides
Start Stop
Enter
2 Press start and lamination will
begin after warm up. Screen
Start Stop
Enter
4 LCD screen will display number of
documents being laminated. Screen