GBC AutoUltima Pro HiRes - Manual (Page 8)

8
AutoUltima Pro – Load Film
USE INSTRUCTIONS BELOW TO LOAD NEW FILM IF COMPLETELY EMPTY.
1 First, complete steps 2, 3 and 4
from "Load Film" page 7. Close 4
EZ levers.
2 Press "Feed" switch (forward)
and insert "Feed Card" as shown.
Insert card with slight force
through film rollers.
3 Insert Idler Bar Assembly. Continue
pressing feed switch and wait for
clear, wrinkle-free lamination.
Start Stop
Enter
4 Close top cover, scroll up or down
to select film thickness. Press
"Enter" to confirm. Press "Start" to
resume lamination. Screen
AutoUltima Pro – Status Message
Laminator comes pre-Ioaded with 75mic film, Approximately 90 metres.
Standby Screen.
Counting screen,
showing pages
laminated so far.
Load document(s) to
be laminated.
Job complete screen.
Total pages laminated.
Machine is in heat
mode. Machine is
warming to operating
temperature.