HCO SG565FV - Manual (Page 6)

Scouting Camera SG565FV
2 Cautions
Page 4
2 Cautions
★ The working voltage of the camera is 6V. The camera is supplied by four AA
batteries.
★ Please insert the SD-card when the power switch is at OFF position before testing
the camera. The camera has no internal memory for saving images or videos. If no
SD-card is inserted, the camera will shut down automatically after a continuous
indication sound.
★ Please unlock the write-protect before inserting the SD-card. Please do not insert
or take out the SD-card when the power switch is at ON position.
★ In the TEST mode(insert the control into the USB interface then switch the camera
at ON position), the camera will shut down automatically after 3 minutes if no
operation is done. Please turn on the power again if you want to continue to work
with the control.
★ The camera will be in USB mode when connected to a USB port of a computer. In
this case, the SD-card functions as a removable disk.
★ Please ensure sufficient power when having firmware upgrade, otherwise the
upgrade process could be interrupted incorrectly. If any fault occurs after improper
upgrading process, the camera may stop function properly.
Please don’t disassemble the camera.