HCO SG580MB Manual - Manual (Page 12)

HCO ScoutGuard SG580MB
3 Quick Introductions
Page 9
default settings or previous custom settings. The camera has the sound
recording function, so the sound will be embedded in the video clip
while capturing a video.
3.4 Enter into the TEST Mode
Slide the power switch to the TEST position and enter into the
TEST mode. There are some functions in TEST mode: Custom settings,
manual capture, preview or send MMS manually. The remote control is
needed in this mode.
3.4.1 Custom Settings
Press MENU on the remote control to enter into the menu setting.
The camera can be adjusted to manually customize the camera settings
which display on the LCD screen on the camera or external TV monitor.
The detailed operations will be described in the “Advanced Operations”
chapter.
3.4.2 Manual Capturing
You can press RIGHT to manually capture photos or record a video.
3.4.3 View Images
or Videos
There are two ways to view the captured images or videos:
1. LCD screen on camera
2. TV monitor which connects to the camera with a TV cable
Press OK to view images, the latest image will be shown in the LCD
screen on the camera or TV monitor. Press UP to view the previous
image and press DOWN for the next image. Please note that a video
cannot be played back on the LCD screen and only the thumbnail of the
video is showed.