HCO SG580MB Manual - Manual (Page 22)

HCO ScoutGuard SG580MB
4 Advanced Operations
Page 19
c) Press OK to enter into submenu.
d) Press LEFT or RIGHT to select item, press UP or DOWN to
change the value.
e) Press OK to save all current setting and return to info display.
Press MENU to cancel setting and return to info display.
4.1.7 Set Photo Burst
This parameter affects the number of pictures taken for each
triggering in the camera mode. It has three values: “1 Photo” “2 Photos”
and “3 Photos”. Its default value is “1 Photo”. The following shows how
to set photo burst to 3 Photos, provided that the previous option is 1
Photo:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Photo Burst.
c) Press LEFT or RIGHT to select 3 Images.
d) Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.8 Set Video Length
This parameter is effective and can be adjusted only when the device
in the video mode under ON mode. Its value extends from 1 to 60
seconds with a step of one second. The default value is 10 seconds.
Press LEFT and RIGHT to decreases or increases the value by 1
second.
The following shows how to set video length to 5 Seconds provided
that the previous value is 10 Seconds: