HCO SG580MB Manual - Manual (Page 9)

HCO ScoutGuard SG580MB
2 Cautions
Page 6
2 Cautions
★ The working voltage of the camera is 6V. The camera is supplied by
four or eight AA batteries.
★ Please install batteries according to shown polarity.
★ Please unlock the write-protect before inserting the SD-card.
★ Please insert the SD-card when the power switch is in the OFF
position before testing the camera. The camera has no internal
memory for saving images or videos. If no SD-card is inserted, the
camera will shut down automatically after a continuous indication
sound.
★ Please do not insert or take out the SD-card when the power switch is
in the ON position.
★ It is recommended to format the SD-card by the camera when used
for the first time.
★ The camera will be in USB mode when connected to a USB port of a
computer. In this case, the SD-card functions as a removable disk.
★ In the TEST mode, the camera will shut down automatically after 3
minutes if no operation is done. Please turn on the power again if
you want to continue to work with the remote.
★ Please ensure there is sufficient power when having a firmware
upgrade, otherwise the upgrade process could be interrupted. If any
fault occurs after an improper upgrading process, the camera may
stop functioning properly.