HCO VH200HD User Manual
Page 13
Page | 12
2.
Create your personalized name using arrows
3.
Push SAVE icon when finished
4.
Push LEFT arrow button to return to menu
ADDITIONAL INFORMATION
TRANSFERRING PICTURES AND VIDEO TO A
COMPUTER:
Pictures and video can be removed in one of two ways:
1. SD memory card can be removed (ALWAYS ensure camera
is OFF before removing) and transferred to computer or SD
card reader.
2. Connect camera to computer using USB cable.
i. Turn camera ON (may not be required)
ii. Computer will recognize camera and prompt you to open
file or save pictures
FIRMWARE UPDATES
This camera is designed to accommodate future firmware updates if
required.
1. Copy the firmware update file (eg. Main.elf and spec.bin)
onto the SD card root directory (do not place in any file)
2. Insert SD card into the camera
3. Push and hold UP arrow while turning camera to SETUP
mode
4. The blue LED on camera front will blink until the update is
finished.
5. The camera should automatically re-boot. If it does not re-
boot within 10 seconds of the blue LED turning off, turn
camera OFF and remove batteries to break power connection.
6. Replace batteries and turn camera to SETUP mode
7. Confirm new firmware version by checking ‘Camera
Information” (see instructions)