HCO VH200HD - Manual (Page 9)

Page | 8
VIDEO SOUND
Video sound recording can be turned ON or OFF.
1. Select VIDEO SOUND
2. Select ON or OFF and push OK to set
QUIET TIME
Also known as, “Time Interval or Delay Time”, this feature puts the
camera to sleep after capturing an image for the selected period of
time before it can be re-activated by motion. Times vary from 5
seconds to 60 minutes.
1. Select QUIET TIME
2. Select desired ‘quiet time’ and push OK to set
ILLUMINATION
This feature allows the user to use external lighting (XtendIR-B) or
turn off IR lights if no lights are required in the night. User selects
Internal when they want the IR lights of camera to work normally;
select External if connecting XtendIR-B (sold separately) to the
camera OR to turn IR lights OFF at night, and Int + Ext if both the
XtendIR-B and camera IR lights are desired.
1. Select ILLUMINATION
2. Select Internal, External, or Internal + External and push OK
to set
DATE / TIME STAMP
This allows the user to have the date, time, and temperature stamped
onto each photo or video.
1. Select TIME STAMP
2. Select NO or YES and push OK to set
SET DATE / TIME
This feature allows the user to set the display format for date and
time, as well as set the current date and time.
1. Select SET DATE / TIME