HCO VH200HD User Manual
Page 14
Page | 13
TROUBLESHOOTING
1.
The camera does not turn ON
i.
Ensure batteries are inserted properly with correct polarity
and fully charged. If possible test each battery with battery
tester. Approximately 1.7V for Lithium and 1.3V for NiMH
is full power.
ii.
Ensure SD card is properly inserted and not in locked
position
iii.
Reset camera by removing batteries and SD card for 10
minutes
iv.
Cold temperature may decrease battery output sufficiently to
prevent camera from turning ON; check batteries and ensure
they are rated for cold temperature
2.
Beeping Noise when camera turns ON
i.
Insert SD card
ii.
Ensure SD card is not locked
iii.
Format SD card in camera
iv.
SD card may not be compatible
3.
Camera will not take pictures or stops part way even with
full batteries
i.
SD card is not formatted correctly; format SD card in camera
ii.
Ensure SD card is not locked
iii.
SD card is faulty or incompatible; try different SD card
and/or brand. Faulty or incompatible SD cards may cause
system conflict, system crash, and battery drain. Always
format SD card in camera and try different SD cards if
problem persists.
iv.
Batteries do not have enough power to activate picture/video
sequence
4.
Batteries run down quickly
i.
Avoid poor quality alkaline and rechargeable batteries, avoid
mixing different brands and ages of batteries as battery life