BT STUDIO 4500 - Manual (Page 25)

25
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [email protected]
Use any key to disable the alarm when
it is activated.
Display
You can choose to display the handset name or the time in the
standby screen.
1 . Press the button to open the main menu.
2 . Press or until the display shows
hS SeTTingS
and press .
3 . Press or until
DiSPlaY
is displayed, press to select.
4 . Press or to select
TiMe
or
hanDSeT naMe
, then
press to confirm.
5 . Press and hold to return to standby.
Alarm
1 . Press the button to open the main menu.
2 . Press or until the display shows
hS SeTTingS
and
press .
3 . Press until
alarM
is displayed and press to select.
4 . Press or to select
On
or
OFF
and press .
5 . If you select
On
you should now enter the time in 24hr format,
i.e. for 07.30am enter , and press .
The icon will show on the standby screen to indicate that
the alarm is set.
6 . Press and hold to return to standby.
When the alarm goes off
The alarm will only go off on the handset were it has been set
(this is indicated by the icon on the standby screen). Turn the
alarm off by pressing any handset button, even if the keylock
has previously been activated.
The alarm will sound even if the handset ringer has been set to
off. The ringer will remain set to off after the alarm has sounded.
The alarm will sound with the handset ringer melody that has
been set and the screen will show
alarM On
.
If the alarm sounds during a call, you will hear a beep in
the earpiece.