BT STUDIO 4500 - Manual (Page 36)

36
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [email protected]
To record a memo
You can record a memo on the answer machine for another
member of your household.
1 . Press the button, the display shows
anS Machine
, press .
2 . Scroll or to
MeMO
and press .
3 . A voice prompt played through the handset earpiece will tell
you when to start speaking. The display shows
recOrDing
.
Press when you have finished recording and the memo will
be played back to you. During playback you can press to
delete the memo.
4 . Press and hold to return to standby mode.
Memory full
If the memory becomes full when a caller is leaving a message
the machine announces “Memory full, thank you for calling”
and hangs up.
When the memory is full, your answering machine will
automatically switch to Answer Only mode. You must delete
messages to allow for more messages to be recorded, see previous
page for instructions.
Recording time
Recording time allows you to set the amount of time that
can be allocated to an incoming message. The default is 3
minutes. You can change this to 1 or 2 minutes, or Unlimited.
When the allocated time is reached your BT Studio 4500 will
announce “Thank you for calling” and then hang up.
1 . Press the button, the display shows
anS Machine
, press .
2 . Press or until
anS SeTTingS
is displayed and press
to select.
3 . Press or to display
recOrD TiMe
and press .
4 . Press or to select
1 MinUTe
,
2 MinUTeS
,
3 MinUTeS
or
UnliMiTeD
and press .
5 . Press and hold to return to standby.
To playback a memo
A memo is played back as any
other recorded message, see page
31 and 35.