Kino Flo BarFly 100/200/400 - Manual (Page 7)

7
Inserting Louvers & Gel Frames
Rotate accessory locking tab counter clockwise
to open accessory holder.
Gel frame fits into lower accessory channel.
The louver slides into the upper accessory
channel.
Rotate tab clockwise to lock accessories in
place.(Both ends of fixture)
A 180° turn loosens the orientation of the
mount. A right turn tightens the mount.
The tension on the lock lever may be
adjusted by pulling the handle away from
the mount. This disengages the handle from
the screw mechanism and allows the lever to be
reoriented.
Lollipops are interchangeable.
MTP-L Kino 41 Lollipop w/ 3/8” Pin
MTP-LB Kino 41 Lollipop w/ Baby Receiver
MTP-LBS Kino 41 Lollipop w/ Baby Rcvr Short
BarFly Mounting Plate