Kino Flo BarFly 100/200/400 User Manual
Page 9
9
BarFly 200/100 w/ Edge Mount
BarFly Snoot
Correct Lamp Orientation
The
BarFly 200/100 Edge Mount (MTP-BFE)
is attached to the edge of the fixture with two
thumbscrews.
Note: Due to weight capacity, an edge mount for the
BarFly 400 is currently not available.
Fit the end of the Snoot containing the elastic bands
over the fixture.
The tabs of the gel frame will position the Snoot to
the front of the fixture.
The Edge Mount can be inserted onto a grip arm or
a standard baby pin.
This type of rigging enhances the fixture’s narrow
profile making it easy to hide in the shot.
For stable color rendering, use lamps in either the base up position or the
horizontal position. Do not operate fixture in a base down position. Base
down position may result in increased Kelvin and increased green spike.
To secure the Snoot to the fixture, loop the elastic
bands over the accessory lock knobs.