Kino Flo Trans-Flo User Manual
Page 5
Advertising
To operate, the TRANS-FLO SYSTEM in the Series Ballast Dimming Mode you
need a minimum of:
5
TRANS-FLO Power & Dim Cable, 6ft.
Primary power feed line and dimming line
( both with Edison connectors ). One cable
is needed for the first ballast in a series.
TRANS FLO Two-Lamp Ballast, 120 VAC
A standard-output, flicker-free electronic
dimming ballast. Operates two 15-inch, 2ft,
3ft or 4ft lamps.
Lamp w/ Harness ( need two per Ballast )
15-inch Med Bipin
2ft Med Bipin
3ft Med Bipin
4ft Med Bipin
TRANS-FLO Jumper, 10ft & 2ft
To jumper primary voltage from one ballast
to the next.
Advertising