Krell Phantom Manual User Manual
Page 45
45
(SECTION SEVEN: Customizing the Phantom continued)
8.
Press the enter button or key to confirm the selection. The front panels display
(3) shows:
BACK.
9.
Press the enter button or key to go back to the main menu.
10.
Use the level control knob on the preamplifier front panel or the up and down
keys (14) on the remote control to select
LOW PASS FILTER
and repeat steps 2-9
for Low Pass.
Subwoofer Level Trim
This function sets the subwoofer output level relative to the main output level. The
options are: +/- 12dB.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
SUBWOOFER LEVEL TRIM.
2.
Press the enter button on the preamplifier front panel or the enter key (6) on the
remote control
.
The display (3) reads:
0dB
.
3.
Use the level control knob or the up and down keys to select the desired
adjustment.
4.
Press the enter button or key to conirm the selection.
Subwoofer Output
This function enables various operating modes for the subwoofer. The options are:
stereo/mono, phase, infrasonic filter, xover disable.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
SUBWOOFER OUTPUT.
2.
Press the enter button on the preamplifier front panel or the enter key (6) on the
remote control
.
The display (3) reads:
STEREO/MONO
.
continued