Nipros HDP-2000 - Manual (Page 14)

14
Tripod base (Tripod adaptor)
Main body fixing sarews, left and right
Camera mounting plate
Fixing
4. Attach the tripod base to the camera mounting plate of the camera plinth
and secure it with the screws.
5. Place the teleprompter main body on the main body uniting board of the
camera plinth (Put the main body uniting board into the groove of the guide
rail on the bottom of the teleprompter main body),
and slide it into the depths of the rail until it stops.
6. Tighten the main body fixing screws to unite the main body and the plinth firmly.