Nipros HDS-300 - Manual (Page 2)

■Installation
1.Mount a camera to the HDS-300 with the supplied 1/4 or 3/8 inch camera screw.
For a handy camera ; AG-HPX250,AG-160/A, etc.
1.1. Attach a camera to HDS-300
directly. 1.2. Using a Tripod Base
For a Shoulder type camera;
( )
1. Attach a camera to HDS-300
and secure it with the supplied
screw.
2. Adjusting the height of the head
plate of HDS-300 : Loosen the
head height positioning screw and
adjust the height of the head. And
secure it with the supplied screw.
3. Mount the camera to HDS-300.
Tripod Base Tripod Base
Tripod Adaptor Plate
Head height positioning screw
1. Attach a Tripod Base to the
HDS-300 and secure it with
the supplied screw.
2. Attach a Tripod Adaptor Plate
(ST-1, optional) to the camera
and secure it with the supplied
screw.
1. Attach a Tripod Base to HDS-300
and secure it with the supplied
screw.
1.3. Using a Tripod Base
3. Mount the camera to HDS-300.
Tripod Base
HDS-300
Bottom Plate
Bottom
(lower)
surface
or Camera
1. Attach the Tripod Base or Camera on the HDS-300 2. Attach the Tripod Adaptor Plate ST-2 or
Tripod Plate on the bottom surface of the
HDS-300 with the supplied screws.
Tripod Adaptor Plate ST-2
with the supplied screws.
Select the appropriate holes from among the twelve
long holes considering the balance of the weight of
the camera and others.
Tripod Base
HDS-300 (Bottom Plate)
Tripod Adaptor Plate ST-2
How to attach the Tripod Base and Tripod Adaptor Plate ST-2
Camera
Dent for
screw head
Dent for
screw head Tripod Base
Tripod
2