Revel Sub 30 - Manual (Page 13)

APPLICATIONS
The REVEL ULTIMA SUB 30 powered subwoofer system is very
flexible and can be configured for use in various applications with
associated external components.
As an aid, use the chart below to quickly locate an application with
configuration characteristics that is closest to your desired system.
The most common ones are Figures 5 and 6 (on pages 14 and 15),
where one or more REVEL ULTIMA SUB 30 subwoofers are
connected to a multi-channel controller and use the controller’s
internal crossover.
NOTE: If your multi-channel controller has both SUB and LFE
Outputs, use the SUB Output for the subwoofer system(s) connections.
NOTE: When using the multi-channel controller’s crossover, the crossover
frequency is typically set to 80 Hz for the center, surrounds and back
channels. See “Selecting Crossover Points And Slopes” on page 26.
REVEL ULTIMA SUB 30
Owner’s Manual
13
ULTIMA SUB 30 CONFIGURATION CHARACTERISTICS
APPLICATION # of Channels Crossover on # of Subs. High-Pass Out
(Figure #, page #) 2 Multi. Contrl. Sub. 1 Multi. Yes No
Figure 5, page 14 ✔ ✔ ✔ ✔
Figure 6, page 15 ✔ ✔ ✔ ✔
Figure 7, page 16 ✔ ✔ ✔ ✔
Figure 8, page 17 ✔ ✔ ✔ ✔
Figure 9, page 18 ✔ ✔ ✔ ✔
Figure 10, page 19 ✔ ✔ ✔ ✔
Figure 11, page 20 ✔ ✔ ✔ ✔
Figure 12, page 21 ✔ ✔ ✔ ✔