Revel Sub 30 - Manual (Page 18)

Figure 9. How to connect
two REVEL ULTIMA SUB 30
subwoofers to a home theater
multi-channel controller using
the subwoofers’ internal
crossovers.
APPLICATIONS (Continued)
MULTI-CHANNEL CONTROLLER AND REVEL ULTIMA
SUB 30 SUBWOOFERS WITH CROSSOVERS IN
STEREO
Using internal crossovers, two REVEL ULTIMA SUB 30 subwoofers
can also be set up for stereo bass with a multi-channel controller, as
shown in Figure 9.
REVEL ULTIMA SUB 30
Owner’s Manual
18
Right ULTIMA SUB 30 Rear Panel
(split view)
Left ULTIMA SUB 30 Rear Panel
(split view)
Main Amplifier
(rear)
To Main Speakers
Left Input
Left Right
Right Input
Multi-Channel Controller (Decoder)
(rear)
Left Output
FRONT/MAIN
Right Output
Left Output
REAR
Right Output
Left Output
SURROUND/SIDE
Right Output
CENTER Output
SUB/LFE Output
NOTE: Set Controller outputs to
full-range L/R Front and no SUB.
If applicable, set all other channels
to pass 80 Hz (typically) and above.
Below 80 Hz (typically), signals will
route to the ULTIMA SUB 30 subwoofers.
or or
or
or
(Optional)
To SUB/LFE Output
(use Y-adapter)
(Optional)
To SUB/LFE Output
(use Y-adapter)