Revel Sub 30 - Manual (Page 8)

Figure 3.The REVEL ULTIMA
SUB 30 with its inner packing
materials.
UNPACKING
To avoid personal injury and possible product damage, we strongly
urge you to enlist additional help before unpacking the REVEL
ULTIMA SUB 30. Also, be sure to observe the following precau-
tions and procedures:
• Do not attempt to lift the product from its packing carton
alone. To unpack a product properly, at least two strong people
will be needed.
• To avoid injury, use extreme care during unpacking.
• Do not lift a product while bending from the waist.
• Always stand as straight as possible and use leg muscles to lift a
product.
1. At the final placement choice (see System Optimization on
page 22), set the packaged REVEL ULTIMA SUB 30 on a rug
or other soft material in the upright position. Open the top
flaps and set aside the cardboard filler. It contains the power
cord, the owner’s manual, test CD, and 3 ⁄ 16" hex key.
2. With the top flaps folded back, roll the carton over onto its
exposed end pad. Open the bottom flaps and fold them back.
Remove the other exposed end pad.
3. Lift the carton off the unit and set it aside, being careful not to
damage the contents (see Figure 3 below).
REVEL ULTIMA SUB 30
Owner’s Manual
8
IMPORTANT
End Pad
Warranty Card,
Owner’s Manual,
Test CD, and
3 ⁄ 16" Hex Key
Power Cord