Richter SAFERUN - Manual (Page 16)

Series MNK, MNK-B, SAFERUN ® Pump condition monitoring system Page 16
9230-070-en Revision 01
TM 7691 Edition 11/2009
7.3 Repairing the unit
The SAFERUN ® may only be repaired by the manufacturer, Richter Chemie-Technik.
If it is necessary to replace individual electronic components, e.g. back plate or flat-ribbon cable, this may be only
done if replaced by original spare parts from Richter Chemie-Technik; under certain circumstances recalibration
may become necessary.
8 Dismantling
Before dismantling, the SAFERUN ® must be
de-energised in accordance with the appli-
cable local regulations (e.g. VDE).
8.1 Dismantling steps
Observe the chapters "Installation" and "Connecting to
the power supply" and perform the steps described
there analogously in reverse sequence.
8.2 Return and disposal
When returning the unit for an inspection, please en-
close as detailed a description as possible of the fault
and the specific application.
WEEE directive 2002/96/EC
This unit is not subject to the WEEE directive
2002/96/EC and the national laws (in Germany e.g.
ElektroG). Take the unit directly to a specialised recy-
cling company and do not use the municipal collection
points for this.
Proper disposal prevents a negative impact on people
and the environment and permits the reuse of valu-
able raw materials.
Materials: see section "Technical specifications“.