Richter SAFERUN - Manual (Page 2)

Series MNK, MNK-B, SAFERUN ® Pump condition monitoring system Page 2
9230-070-en Revision 01
TM 7691 Edition 11/2009
List of contents
List of contents 2
Relevant documents 2
1 About this document 3
1.1 Manufacturer ............................................... 3
1.2 Function ....................................................... 3
1.3 Target group ................................................ 3
1.4 Symbols used .............................................. 3
1.5 Name plate .................................................. 3
2 Safety 4
2.1 Authorised personnel .................................. 4
2.2 Intended use ................................................ 4
2.3 Warning against misuse .............................. 4
2.4 General safety notes ................................... 4
2.5 CE conformity .............................................. 4
2.6 Explosion protection .................................... 4
2.7 Notes on safety for potentially explosive
areas .......................................................... 4
2.8 Notes on the environment ........................... 4
3 Product description 5
3.1 Function ....................................................... 5
3.2 Design ......................................................... 5
3.2.1 User interface and connections 5
3.2.2 Operation 6
3.3 Storage and transport .................................. 6
4 Installation 6
4.1 General notes .............................................. 6
4.2 Installation notes ......................................... 6
5 Connecting to the power supply 7
5.1 Preparing the connection ............................ 7
5.2 Power supply ............................................... 7
5.2.1 Non-potentially explosive area 7
5.2.2 Potentially explosive area 7
5.3 Terminal diagram ........................................ 8
5.4 Circuit diagram ............................................ 8
6 Commissioning with the integrated
display and control unit 9
6.1 Adaptation to other media............................ 9
6.1.1 Allowance of the density of the medium 9
6.1.2 Two-point correction 9
6.2 Condition monitoring and event display ..... 10
6.2.1 LEDs 10
6.2.2 Loading parameters 11
6.2.3 Legend of designations 11
6.2.4 Event display 11
6.2.5 Normal operation with density known 12
6.2.6 Customer operation with density known 13
6.2.7 Customer operation with unknown media 14
7 Maintenance and fault rectification 15
7.1 Maintenance .............................................. 15
7.2 Fault rectification
Note see Section 1.4 15
7.3 Repairing the unit ....................................... 16
8 Dismantling 16
8.1 Dismantling steps ...................................... 16
8.2 Return and disposal ................................... 16
9 Annex 17
9.1 Technical specifications ............................. 17
GENERAL DATA 17
POWER SUPPLY (non-potentially explosive area) 17
POWER SUPPLY (potentially explosive area) 17
INPUTS 17
OUTPUTS Note see Section 1.4 17
9.2 Dimensions ................................................ 18
9.3 Industrial property rights ............................ 18
9.4 Trademarks ................................................ 18
Relevant documents
This Additional Installation and Operating Manual
is only valid together with the Installation and Operat-
ing Manuals:
MNK Permanent grease lubrication 9230-001-de
or
MNK Oil bath lubrication
9230-002-de or
MNK-B Close-coupled design 9230-005-de
EC-Txpe Examination SAFERUN ®
EC-Txpe Examination can
Test and Assessment Report
Declaration of conformity