Administration > diagnostics, Administration > factory defaults, Advanced configuration – Cisco WRT310N User Manual

Page 27: Reboot, Diagnostics, Factory defaults

Advertising
background image

Chapter 3

Advanced Configuration

26

Wireless-N Gigabit Router

Administration > Diagnostics

The diagnostic tests (Ping and Traceroute) allow you to

check the connections of your network devices, including

connection to the Internet. This screen also allows you to

reset the router.

Administration > Diagnostics

Reboot

Reboot

Click Reboot to reset the router.

Diagnostics

Ping Test

The Ping test checks the status of a connection.

IP or URL Address

Enter the address of the PC whose

connection you wish to test.

Packet Size

Enter the packet size you want to use. The

default is 32 bytes.

Times to Ping

Enter many times you wish to test it.

Start to Ping

To run the test, click this button. The Ping

Test screen will show if the test was successful. Click Close

to return to the Diagnostics screen.

Diagnostics > Ping

Traceroute Test

The Traceroute test tests the performance of a

connection.

IP or URL Address

Enter the address of the PC whose

connection you wish to test.

Start to Traceroute

To run the test, click this button. The

Traceroute Test screen will show if the test was successful.

Click Close to return to the Diagnostics screen.

Diagnostics > Traceroute

Administration > Factory Defaults

The Administration > Factory Defaults screen allows you

to restore the Router’s configuration to its factory default

settings.

Administration > Factory Defaults

NOTE:

Do not restore the factory defaults unless

you are having difficulties with the Router and

have exhausted all other troubleshooting

measures. Once the Router is reset, you will have

to re-enter all of your configuration settings.

Factory Defaults

Restore All Settings

To reset the Router’s settings to the

default values, click this button and then follow the on-

screen instructions. Any settings you have saved will be

lost when the default settings are restored.

Advertising