Cisco 2600 Series - Manual

1
Cisco Systems, Inc.
All rights reserved.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Cisco Systems, Inc.
Corporate Headquarters
Copyright © 1998-1999
Text Part Number:
Rack-Mounting the Cisco 2600 Series
Router
Product Numbers: ACS-2600RM-19=, ACS-2600RM-24=
This document describes the procedure to install Cisco 2600 series routers in a rack and includes the
following sections:
•
Safety Recommendations, page 1
•
FCC Class B Compliance, page 3
•
Required Tools and Equipment, page 4
•
Mounting the Chassis in a Rack, page 4
•
What to Do after Installing the Router Hardware, page 7
•
Cisco Connection Online, page 8
•
Documentation CD-ROM, page 9
Safety Recommendations
Follow these guidelines to ensure general safety:
•
Keep the chassis area clear and dust-free during and after installation.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll
up your sleeves.
•
Wear safety glasses when working under any conditions that might be hazardous to your eyes.
•
Do not perform any action that creates a potential hazard to people or makes the equipment
unsafe.
78-5183-02