Cisco 2600 Series - Manual (Page 5)

Rack-Mounting the Cisco 2600 Series Router 5
Attaching the Brackets
Note If you are installing a Cisco 2600 series router in a 19-inch rack with a 17.5-inch opening,
orient the rack-mount brackets so that, when installed, they do not increase the width of the chassis.
(See Figure 2.)
If you are installing a Cisco 2600 series router in a 19-inch EIA-standard rack with a 17.75-inch
opening or a 23- or 24-inch rack, orient the rack-mount brackets so that, when installed, they
increase the width of the chassis. (See Figure 3.)
Note The following illustrations show how to connect the bracket to one side of the chassis. The
second bracket connects to the opposite side of the chassis.
Figure 2 Bracket Installation—Front Panel Forward (19-Inch Rack with a 17.5-Inch
Opening)
Note When installed in a 19-inch rack with a 17.75-inch opening, the Cisco 2600 series routers will
protrude beyond the front of the rack.
Figure 3 Bracket Installation—Front Panel Forward (19-Inch Rack with a 17.75-Inch
Opening or a 23- or 24-Inch Rack)
27712
Note: The second bracket attaches to the other side of the chassis.
27713
19-inch
brackets
23-inch and 24-inch
brackets