Cisco ACE XML OL-13877-01 - Manual

C H A P T E R
11-59
Cisco ACE XML Gateway Administration Guide
OL-13877-01
11
Miscellaneous Administrative Tasks
This chapter describes various system maintenance and setup tasks you may need to perform. It covers
these tasks:
• Obtaining Version Information, page 11-59
• Creating Appliance User Accounts, page 11-60
• Backing Up and Restoring the System, page 11-61
• Applying an Update, page 11-63
• Configuring Serial Console Boot Control, page 11-64
• Recovering from Low Disk Space, page 11-65
• Recovering System Passwords, page 11-66
• Changing the MTA Postmaster Address, page 11-68
Obtaining Version Information
Every ACE XML appliance has a version number that identifies the appliance’s software with a
particular release. This information is often required when contacting Cisco support or to ensure that all
appliances in a cluster are running the same software version.
To obtain version information from the ACE XML appliance:
Step 1 Log into the appliance shell as the
root
user.
Step 2 In the Main Menu, choose the Advanced Options menu item.
The Advanced Options menu appears.
Step 3 Choose the Version Information menu item.
The release identifier string appears as a banner at the top of the screen. In the center of the screen, the
appliance displays version numbers of the currently-installed Gateway software, operating system
kernel, Tarari XML coprocessor card firmware (this option information refers to a hardware add-on
option that is no longer available), and nForce hardware keystore card firmware.