SONIQ E23Z13A REV AC - Manual (Page 16)

OSD Menu Operation The DVD Operation Menu Operation Guide The DVD Operation
-31- -32- - - 29 -30-
Basic Operation
1. Press SOURCE button on the remote control and select
DVD mode.
2. Insert a disc into the loading slot located on right side of
the TV. Make sure that you load the disc with the silver
side facing you (label side face away from you). The disc
will be read and after a short time will automatically start
playing.
3. Press button on your unit or on remote control to eject
the DVD disc.
Note: DVD mode must be selected before a disc is loaded.
Skip Ahead or Back
Press or button once during play to skip a chapter (DVD) or a track (Video CD / CD)
backwards or ahead.
During playback, press / button repeatedly to scan the disc backward or forward at x2, x4,
x8, x20 normal speed. Press or OK button to resume normal play.
Rapid Advance / Reverse
Press button during playback to stop playback; in stop mode, press or OK button, playback
resumes at the point where it stopped previously; press button twice to clear the resume function.
Stop Playback
During playback, press button will cause the player to enter pause mode. Press OK button or
button again to continue to play.
For DVD, the picture will become static.
For CD audio, it will become silent.
Pause Function
Press button repeatedly on the remote control during playback, the disc will be played at 1/2,
1/4, 1/8, 1/16 normal speed.
Press or OK button to switch back to normal playback speed.
Slow-motion Play
For DVD, user can choose REP Chapter, REP Title and REP ALL.
Subsequently press REPEAT can cycle through these options.
For CD, user can choose Rep Track, and Rep All.
Key press of REPEAT can cycle between these options.
Repeat Function
Display (Remain Time)
This function is applicable for DVD only. It will display the timing information of the playback on
screen. For DVD playback, subsequently press D.DIS button will show the Chapter Elapsed
Time, Chapter Remain Time, Title Elapsed Time Elapsed Time and Title Remain Time Display
Off one by one.
While viewing a program, press TITLE / PBC button to return to the main menu. Use navigation
buttons or input the item index through Number (0-9) to do the selection and then press OK
button to start your Program.
Displaying Main Menu
Press SUBTITLE button during playback, the subtitle language shown on the screen will
change in response to each press.
This function only works on the DVDs recorded with multi-language subtitles.
Changing Subtitle Language (DVD only)
It is possible to change the audio soundtrack language to a different language from the one
selected at the initial settings. (This operation works only on discs with which multiple audio
soundtrack languages are recorded.)
1. Press AUDIO button during DVD disc play, the sound track language changes with the
current sound track number shown on the TV screen.
2. Pressing AUDIO button during VCD disc play will change audio output mode: Left Vocal,
Right Vocal, No Vocal Assist and Voice Cancel.
When no soundtrack languages are recorded, pressing this button will not work.
Changing Audio Soundtrack Language (DVD / VCD Disc)
User can specify the repeating interval by marking the starting point and the end point.
1. Press A-B button to mark the starting point (Playback will continue).
2. Press A-B button to mark the end point and then the marked part will be repeated
automatically).
Press A-B button during repetition will disable the repeat function.
Repeat A-B