SONIQ E23Z13A REV AC - Manual (Page 6)

Connection and setup
-10- -9-
Connection and setup
Connecting VGA Signal
Connecting with an HDMI to HDMI cable
Connect the HDMI output terminal of your HDMI device to the HDMI input terminal on the unit
using an HDMI cable.
Connect PC video output to the VGA IN input terminal using Mini D-SUB 15-Pin cable.
Connect the audio output of your PC to the unit VGA AUDIO IN input terminal using an appropriate
cable.
1. If the input signal resolution is higher than the default display resolution, the screen may be
unable to display image details clearly.
2. Certain PC models cannot be connected to the unit.
3. The computer in the illustration is shown only for reference; your equipment may vary.
4. Additional equipment shown in the illustration is not provided.
5. Do not set the computer’s horizontal and vertical scanning frequencies less then or greater than
the frequency range of the unit. (refer to supported PC Input Signal)
6. If you require more information on how to connect your equipment, please refer to the manual
for the piece of equipment you wish to attach.
HDMI cable
Blu-Ray DVD Player
D-SUB 15-pin cable
(VGA cable)
Audio cable
Connecting the USB Device
Connect one end of the AC adapter to the DC input of unit and then the other end to AC wall outlet.
Connecting the Power Cord
Insert USB device directly to the unit.
1. Please do not turn off the TV or unplug the USB device when the connected USB storage device
is working. When such device is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
2. Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file
system provided with the Windows operating system. In case of a storage device formatted as a
different utility programmer which is not supported by Windows, it may not be recognized.
3. Please connect power to a USB storage device (over 500mA) which requires an external power
supply. If not, the device may not be recognized.
4. If the USB HDD does not have an external power source, the USB device may not be detected.
So be sure to connect the external power source.
5. The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less
for USB memory.
6. Only English is supported in USB mode. Other languages such as Chinese, Japanese, etc.
will not be displayed or display an error.
The product must be operated only from the type of power source indicated on the marking
label (100-240 ~ 50/60Hz).
If the unit will not be used for a long period of time, it should be unplugged from the wall outlet.
Wall outlet
Power cord
AC Adaptor
Power outlet
USB Device