SONIQ E23Z13A REV AC - Manual (Page 5)

-7- -8-
Main Unit Control Main Unit Control
Front Panel
8 9
No. Name Description
VOL+/-
CH+/-
SOURCE
MENU
STANDBY
Remote Control
Sensor Window
Power Indicator 8
9
1
2
3
4
5
6
7
Press this button to eject the DVD disc.
Press VOL+ to increase volume, or VOL- to decrease.
At the OSD menu, press these buttons to move the
selection focus left and right to change settings.
Playback and Pause function.
Press these buttons to sequentially select channels.
When the OSD menu is on, press these buttons to move
the selection focus up or down to change settings.
Press to display all possible input signal sources.
Press to cycle through various sources.
Press this button to display the OSD menu.
When the OSD menu is on, press this button to exit the menu.
Press this button to turn the unit on when it is in standby mode.
Press this button once more to put it to standby mode.
Receives the signal from the remote control. Do not put
any objects in front of the window in order not to hinder
the reception of signals.
Flashes red when the unit is powered on;
Lights up red when the unit is in standby mode.
Rear Panel
1 2 3 4 5 6
7 8 9 10
Connect for media files playback and program recording. USB
8 Connect the HDMI signal. HDMI
5
Connect the PC VGA signal output of your personal computer. 9
DVI or PC VGA audio input.
VGA
AUDIO IN
2
Connect the component video signal. YPbPr 10
AV IN
Connect the audio and video output of your AV equipment to the
unit using the AV cable.
4
Connect to external antenna. ANT IN 3
Connect the OPTICAL to the Audio Amplifier using a optical cable.
DIGITAL AUDIO OUT
OPTICAL
1
6
7
VGA
No. Name Description
EARPHONE Connect to the earphone.
DC IN Connect to the power cord.
1
2
3
4
5
6
7