Clarion MAX973HD - Manual (Page 145)

TV Tuner Operations
49
MAX973HD
English
Owner
’s ma
nua
l
Manual memory
1. Touch the screen to display the TV Tuner
mode screen.
2. Touch the [Band] key to select the desired TV
band (TV1 or TV2).
3. Tune in the desired TV station to be stored.
4. Touch the [List/Edit] key.
5. Touch and hold the desired Preset key for
more than 2 seconds to store the current
station into the preset memory.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory. If 6
stations cannot be received with good reception,
previously stored stations remain and only the
strong stations are stored into memory.
1. Touch the screen to display the TV Tuner
mode screen.
2. Touch the [Band] key to select the desired TV
band (TV1 or TV2).
3. Touch the [List/Edit] key.
4. Touch and hold the [AS] key for more than 2
seconds.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
Preset scan
Preset scan shows each preset channel before it
automatically advances to the next preset. This
function is useful for searching for desired TV
station in memory.
1. Touch the screen to display the TV Tuner
mode screen, then touch the [List/Edit] key.
2. Touch the [PS] key to start preset scan. The
unit starts scanning each station for 7
seconds sequentially.
3. When the desired channel is received, touch
the [PS] key again.
Setting the TV functions
• These operations cannot be performed from
the AV Shortcut menu screen.
Selecting the screen size
You can change the TV screen size to suit to the
screen panel.
1. Showing the TV Tuner mode screen, touch
the [Wide] key.
2. Touch the [Wide], [Cinema], or [Normal] key
to set the desired screen size.
• The factory default setting is “Wide”.
Wide:
The image is expanded so that the rectangle
of the image fit to the screen. The aspect ratio
of the image may be changed.
Cinema:
The image is expanded so that the left and
right edges of the image fit to the screen. The
top and bottom areas of the image may be cut
off.
Normal:
The image is expanded so that the top and
bottom edges of the image fit to the screen.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
• Normally use the TV diver with the “ON”
position.
1. Touch the screen to display the TV Tuner
mode screen, then touch the [Option] key.
2. Touch the [ON] or [OFF] key of the TV DIVER
item to turn this function on and off.
[ON] :
Sets reception emphasising the visual.
[OFF] :
Sets the diver setting to OFF.
3. Touch the [Back] key to return to the previous
screen.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Touch the screen to display the TV Tuner
mode screen, then touch the [Option] key.
2. Touch the Area key of the TV Area item to
display a list of country name.
3. Touch the desired Country Name key to
select a country.
• Touch the [
c] or [C] key to scroll the list.
4. Touch the [Back] key to return to the previous
screen.