SONIQ M102 - Manual (Page 5)

4
You can insert a battery(not supplied) into your clock radio to retain clock and alarm
settings in the event of a power cut. If the radio loses the time setting during a power
cut ,the battery may need to be replaced.
1. Press the catch on the battery cover.
2. While holding the catch , lift the cover of the battery compartment.
3. If a battery is fitted, remove the battery from the battery compartment
and unclip the connector from the top of the battery.
4. Replace the battery with the same type 6F22 006P,observing polarity when fitting
the connector.
5. Re-fit the cover.
Dispose of used batteries with regard to the recycling regulations in your area. Do not
Short circuit batteries or throw them into water, the general rubbish or in a fire.
Weak batteries can leak and damage the unit.
Replace them in good time!
Fitting/replacing a battery:
BATTER DISPOSAL
Carefully unpack the unit. If it is damaged, please return it to your nearest store for
replacement. Remember to take your purchase receipt with you. Retain the User
Handbook. If you pass the unit on to a third party make sure you pass on the handbook.
We suggest you retain the packaging for any recycling regulations in your area.
Basic Operation
FITTING BACKUP BATTERY