SONIQ M102 - Manual (Page 7)

6
The clock provide dual alarm setting ,set the Alarm mode switch to the Buzzer or
Radio position, depending on your wake-up preference, the alarm indicator will light.
NOTE: It is not possible to set the alarm when the Alarm mode switch is
set to alarm off.
1.Press the alarm button, the hour digits will flash.
2.Press the or button to set the hour digits to the correct time.
3.Press the alarm button again, the minute digit will flash.
4.Now press the or button to set the minutes digits to the correct time.
5.Press the alarm button again, the alarm1 is now set.
6.Alarm2 can be set after alarm1 setting finish .
NOTE: If you have set the radio to wake you up, check that a station is tuned before
going to bed and that you have set your preferred wake-up volume.
The radio will play or the buzzer will sound and the alarm indicator will flash,
The alarm will sound for 60 minutes. To stop the alarm sounding, switch the alarm
button to off position.
Press the SNOOZE button to set snooze mode.
The alarm will stop sounding and will sound again after a 9 minute period.
In the unlikely event that your clock is not operating correctly, try resetting it to clear
the problem. Use the end of a paper-clip or similar to press the reset button
inside the reset hole.
The clock will reset.
Set the time and alarm etc.
When listening to the radio, you can select Sleep mode to play for a set period of
time while you are going to sleep.
press the Sleep button repeatedly to choose your preferred sleep time in the range
of 15-120minutes.
The radio will switch off automatically after playing for the sleep
time you set.
Press the Sleep button repeatedly until the sleep time not display.
Power supply:................AC 240V~,50Hz
Power consumption........4W
Backup battery...............9V (6F22 006P)
Frequency range(FM):....87.5-108MHz
Weight:..........................330g
Class ll construction double insulated.
This product must not be connected to earth.
WHEN ALARM SOUNDS
SETTING THE ALARM TIME
SNOOZE MODE
RESET
SLEEP
SPECIFICATION
Basic Operation