6 starting up and turning off, 7 unlocking and closing of the screen – SONIQ MP10 User Manual
Page 11
2.6 Starting up and turning off
Starting up
Press the power key for 3 seconds, you can see the starting up picture. After the
system is started, the machine enters into screen lock state, please unlock according
to direction indication of sliding icon on the interface.
ff
o
g
n
i
n
n
r
u
T
1．
After pressing the power key for a long time, the shutdown option will pop up.
2．
Click OK.
2.7 Unlocking and closing of the screen
The machine will close automatically when the screen is left unused
1．After the screen being left unused for a period of time, the machine will close
screen automatically, so as to save battery power.
2．Under screen on state, press the power key, the screen will close immediatey.
Prompt: if you want to inquire how to set turn-off time of screen, please refer to
chapter 9.1.
Turninng on under screen off state
If the screen is in off state, you can unlock the screen by pressing power key for a
short time or the return key for a long time. After opening, the screen will enter lock
state, press “lock” icon by your finger and slide rightwards, the screen will be unlocked,
press “lock” icon and slide leftwards, you can enter the camera function.
Figure 3-1
- 8 -
Brief Introduction &Basic Operations