SONIQ MP10 - Manual (Page 21)

3. Click and select the Backup and Reset.
4. Click and select the Factory Default.
5. Click and select the Tablet Computer Resetting.
6. Wait for system resetting.
Rapid Screenshot
When you are located on such any interface as Game or Movies and intend to serve
the wonderful picture as the commemoration, the desired pictures can be reserved
only by pressing Volume Down key and Power key simultaneously.
Speedily Set Such Functions as Fly Mode
Click the status bar on the lower right corner of interface, pop up two windows, there
are some prompt messages for your equipment on the windows below. Click the
windows above and enter into the setting for Fly Mode,WIFI, G-sensor Switch,
3 Connection Establishment
3.1 WIFI Connection
Your MID can be connected onto Wi-Fi network to connect the operation:
1. On the homepage interface, click and select the menu key and pop up the menu
setting.
2. Click and select the System Setting.
3. Click Wi-Fi and open wi-fi switch.
4. After opening Wi-Fi, the searched Wi-Fi network can be scanned automatically.
from the equipment in the windows on the right.
5. Select the Wi-Fi network required to be connected, if the password is added, pop
up the password input windows and input the corresponding password.
6. Click the Connection.
- 18 -
Brief Introduction &Basic Operations
Volume Control and Backlight Regulating and speedy operation for Setting Function.