SONIQ MP10 - Manual (Page 40)

Display settings
 Adjust screen brightness
1. Click the application icon to enter the settings application on the Homepage.
2. Click Display.
3. Click Brightness.
4. Pop up the brightness setup panel, and drag the brightness bar to left or to right
to adjust the brightness.
5. Click OK.
 Adjust screen standby time
1. Click the application icon to enter the settings application on the Homepage.
2. Click Display.
3. Scroll down the screen and then click Sleep.
4. Pop up screen standby time settings and choose the standby time you want.
9.2 Security and Location
1. Set unlock pattern
You can set your own unlock pattern (equivalent to the password) to protect the
privacy of your MID.
1. Click the application icon to enter the settings application on the Homepage.
2. Click Security.
3. Click Set screen lock.
4. Click Pattern.
5. Pop up unlock pattern panel with 9 contacts, at least four of which are connected
vertically, horizontally or diagonally. Put fingers away from the screen upon
completion and the system will record the pattern you set.
6. Click Continue.
7. Draw the screen unlock pattern again when the prompt appears and click OK.
Tips: If you do not want the unlock graphics display on the screen while
unlocking, please clear the check box of Use visible pattern.
- 37 -
Basic Settings