SONIQ T200 - Manual (Page 7)

h) Rename Program
To rename channel, press UP/DOWN key to choose the line where the channel needs to be
renamed.
4.1.2 EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs seven days in advance for
every tuned channel. Press the EPG button on the Remote Control to access the guide.
You can use the UP/DOWN key to select the preferred program. If there is more than one page of
information, use the BLUE/GREEN button for page down and the RED/YELLOW button for page
up.
4.1.3 Sort
Sort your channels from the following options:
By LCN - Sort the channels in ascending order.
By Service Name - Sort the channels in alphabetical order.
By Service ID - Sort the channels according to the station.
By ONID - Sort the channels according to ONID.
4.1.4 LCN (Logical channel number)
Set LCN on or off.
4.2 Picture Setting
To access the Menu, press MENU then select Picture using the RIGHT/LEFT key. The Menu
provides options to adjust the video settings. Press UP/DOWN to select an option and press
RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu.
4.2.1 Aspect Ratio:
4:3 LB (Letterbox): For conventional 4:3 TV. The full width of a windscreen content is displayed on
a normal TV with black bars above and below the picture.
4:3 PS( Pan & Scan): For conventional 4:3 TV. It crops the left and right edges of a windscreen
content to fit a normal TV.
16:9-If you are using a wide screen TV, select this option.
Auto:Automatic switching ASPECT.
4.2.2 Resolution
You can change this setting if the picture resolution does not appear to be correct. This setting is to
match the most common setting for HDMI.
576I: For PAL TV system.
576P: For PAL TV system.
720P: For NTSC or PAL TV system.
1080I: For NTSC or PAL TV system.
4.2.3 TV Format
If the picture does not appear to be correct you can change this setting.
This should match the most common setting for TVs in your country.
NTSC: For NTSC system TV.
PAL: For PAL system TV.
4.2.4 OSD Transparency
Press Menu then select Picture using the RIGHT/LEFT key. Press UP/DOWN to select OSD
Transparence. The diaphaneity of menu will be tuned up.
4.3 Channel Search
To access the menu, press MENU and select Search Channel using the RIGHT/LEFT keys.
This Menu provides options to adjust the Search Channel settings.
Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings. Press EXIT to
exit the Menu.
Basic Operation
- 5 -