SONIQ T200 - Manual (Page 8)

4.3.1Auto Search
This option will automatically search for channels and save them once the scanning is complete.
All previously saved channels and settings will be deleted.
1. Select Auto Search and press OK or RIGHT to start channel search.
2. To cancel channel search, press EXIT. Any channels that have been found will be saved.
4.3.2 Manual Search
This option allows you to scan for new channels without deleting previously saved channels and
settings.
1. Select Manual Search then press OK or RIGHT. The channel search screen will appear.
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list. If channels can not be found during
searching, the unit will exit automatically.
4.3.3Country
Select your country of residence.
4.3.4 Antenna Power
Enable Antenna Power if an external active antenna is connected.
4.4 Time Setting
To access the Menu, press MENU then select Time using the RIGHT/LEFT keys. The Menu
provides options to adjust the time settings.
Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings. Press EXIT to
exit the menu.
4.4.1 Time offset
Select auto or manual for GMT offset adjustments.
4.4.2 Country Region
Select the Country Region when Time Offset is set to Auto.
4.4.3 Time Zone
Select the Time Zone Offset when Time Offset is set to Manual.
4.4.4 Auto Standby
Automatic switch to standby mode after 3 hours of active mode without action from user.
4.5 Option
To access the Menu, press MENU and select Option using the RIGHT/LEFT keys. The menu
provides options to adjust the OSD Language, Subtitle Language and Audio Language.
Select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the Menu
4.5.1 OSD (On Screen Display) Language
Select an OSD language.
4.5.2 Subtitle Language
Select the preferred subtitle language.
4.5.3 Audio Language
Select the preferred audio language for watching TV channels.
If the language is not available, the default program language will be used.
4.5.4 Digital Audio
Select digital audio output mode.
4.6 System Setting
To access the Menu, press MENU and select [System] using the RIGHT/LEFT keys. The menu
provides options to adjust the system settings.
Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press
EXIT to exit the Menu .
Basic Operation
- 6 -