Sound Devices 664 - Manual (Page 20)

White box indicates selected
parameter. Rotate Select
Encoder to adjust value. Press
Select Encoder to move to
next parameter (HPF, Trim,
Fader).
Press Headphone Encoder
to set to Line Input, Direct
Output, or Off.
Press the Select Encoder to cycle the white highlighter box between HPF, Trim, and Fader. Rotate
the Select Encoder to adjust the value of the highlighted parameter (Acceleration is applied to Trim
and Fader adjustments to enable fast adjustments). To change an input back to a direct output for its
respective 1-6 input, press the Headphone Encoder and select the DIR.OUT option.
The Input Settings screen for inputs 7-12 can be access without engaging PFL for that input by hold-
ing the Select Encoder down while sliding the Input Selector switch.
PFL of multiple inputs simultaneously is disabled in 12 Channel Mode.
Input 7-12 faders can also be adjusted from the Main Screen:
1. Press the Meters button until a Meter View which displays the desired input is visible.
2. Turn the Select Encoder to highlight the input to be adjusted.
3. Press the Select Encoder to access fader adjustment mode for the selected input. The input’s
fader value (in dB) will appear in the lower right corner of the LCD.
4. Turn the Select Encoder to adjust the gain. Fader adjustment mode will exit automatically
after 3 seconds.
Channel being adjusted
Fader value (during adjustment)
664 User Guide and Technical Information
v. 2.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
14
In
put Se
tup & Contr
ol