Sound Devices 664 - Manual (Page 66)

Connector Pin Assignments
Connector Pin Assignments Notes
(6) XLR-3F
Analog Inputs 1-6
1 – ground
2 – signal (+)
3 – signal (-)
Mic- and Line-level balanced. For unbalanced, pin 1 and
pin 3 tied together = ground, pin 2 = positive.
(6) TA3M
Direct Outputs 1-6 /
Inputs 7-12
1 – ground
2 – signal (+)
3 – signal (-)
Active balanced direct outputs or active balanced inputs
7-12. Output level is selectable in Setup Menu as Line,
-10, or Mic level. For unbalanced, pin 1 = ground, pin 2 =
positive, pin 3 = float (no connect). Mates with Switchcraft
TA3F-type connector.
(1) TA3M
Slate Mic Input
1 – ground
2 – signal (+)
3 – signal (-)
Active balanced input for external Slate Microphone.
(2) XLR-3M
Master Outputs/
AES Outputs
1 – ground
2 – signal (+)
3 – signal (-)
Transformer balanced, Output Level is selectable via
menu between Mic, -10 dB, or Line-level.
For unbalanced, pin 1 and pin 3 tied together = ground,
pin 2 = positive.
Balanced AES3 Out A,B on XLR-3M connectors, 110
ohm, 2 V p-p, AES3 and S/PDIF compatible with RCA
adaptor.
(1) 3.5 mm
RTN B
tip – signal L
ring – signal R
sleeve – signal ground
Mates with 3.5 mm TRS jack. Signal is unbalanced.
(2) 10-Pin Hirose F
Master Output / RTN
Input
1 – L (+) output
2 – L (–) output
3 – R (+) output
4 – R (–) output
5 – R (+) return
6 – n/c
7 – L (+) return
8 – n/c
9 – ground
10 – ground
Mates with Hirose RM15TPD-10P(71) connector.
Outputs are Transformer Balanced, output level is menu
selectable between Line, -10, or Mic level. For unbalanced
connections XLR connectors should be wired, pin 1 and
pin 3 tied together = ground, pin 2 = positive.
Balanced AES3 Out C,D on top 10-Pin connector, 110
ohm, 2 V p-p, AES3 and S/PDIF compatible with RCA
adaptor.
(4) TA3M
L, R and X1, X2 Outputs
1 – ground
2 – signal (+)
3 – signal (-)
Active balanced, output level is selectable in Setup Menu
as Line, -10, or Mic level. For unbalanced, pin 1 = ground,
pin 2 = positive, pin 3 = float (no connect). Mates with
Switchcraft TA3F-type connector.
(1) TA3M
COM RTN
1 – ground
2 – signal (+)
3 – signal (-)
Balanced line input for COM RTN signal. Mates with
Switchcraft TA3F-type connector
(1) TA3M
COM Send
1 – ground
2 – Left Signal
3 – Right Signal
Unbalanced stereo output. Mates with Switchcraft TA3F-
type connector.
(1) TA3M
Tape Output
1 – ground
2 – Left Signal
3 – Right Signal
Unbalanced stereo output. Mates with Switchcraft TA3F-
type connector.
(1) 3.5 mm
Tape Output
tip – signal L
ring – signal R
sleeve – signal ground
Mates with 3.5 mm TRS jack. Signal is unbalanced.
664 User Guide and Technical Information
v. 2.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
60
Connect
or Pin Assignments