Trebor PC7 - Manual (Page 7)

PC7 CONTROLLER OPERATION / MAINTENANCE MANUAL PAGE 7
3.1 PERFORMANCE CHARTS
Pumping capacity is a function of air supply pressure and volume, suction head,
suction line restrictions, discharge head, discharge line restriction, and fluid
specific gravity and viscosity.
Air Supply
Pressure
(PSIG)
Turns on
adjustment
screw
Cycles
Per
Minute
(+/-15%)
20 0 80
20 1/2 30
40 0 135
40 2 70
60 0 190
60 2 80
80 0 240
80 2 110
NOTE: Test information is based on specific conditions and limited sampling.
Use for general reference only. This information is preliminary and may be
changed at a future date.