08 statement of warranty – Tweco SC10 User Manual
Page 16
Advertising
INTRODUCTION & DESCRIPTION
2-2
Manual 0-2479
2. Input Power
48 vdc supplied from the Plasma Cutting Power Sup-
ply
3. Front Panel Controls
MODE, LIFTER SPEED, TORCH, ARC VOLTS,
PIERCE HT, PIERCE DELAY, and END OF CUT RE-
TRACT
4. Front Panel Indicators
Arc Volts Display, PLASMA ON, AUTO HT, FIND
HT, HI, LO, T.H.C. ACTIVE, UP, and DN indicators
5. Rear Panel Connection
Lifter Motor Cable Connection
6. Dimensions (H x W x D)
2.62 x 12.12 x 10 inches (66 x 308 x 254 mm)
7. Weight
5 lbs (2.5 kg)
B. Lifter Motor
The following applies to the Lifter Motor Assembly only.
1. Dimensions (H x W x D)
29 x 10 x 8 inches (737 x 254 x 203 mm)
Refer to Appendix 5 for detailed dimensions.
2. Weight (Approximately)
20 lbs (9.07 kg)
Advertising