Tweco 190 MIG Thermal Arc Fabricator - Manual (Page 21)

FABRICATOR 190 WELDING MACHINE
Manual No. 0-4838 2-5 INTRODUCTION
2.13 Wire Drive Specifications
Wire Drive Specifications
Control Circuit Supply 30VA @ 24VAC
Wire Drive Motor Supply 40VA @ 2 to 24VDC (Intermittent Duty)
Wire Speed Range 80 to 700 IPM
(2 to 18 m/min)
Wire Diameters
Material
.023”
(0.6mm)
.030”
(0.8mm)
.035”
(0.9mm)
.045”
(1.2mm)
Mild Steel • • •
Stainless Steel • • •
Aluminum • •
Flux Cored • • •
Wire Spool Capacity 44 lb, 33 lb, 10 lb, 8” and 12” wire spool sizes
2.14 Fabricator 190 Package System Contents
Fabricator 190 Package System Contents
Fabricator 190 Power Source with Integrated Wirefeeder
Factory Fitted Wheeling Kit
Factory Fitted Single Cylinder Rack
Factory Fitted Primary Power Cable 10 AWG, 10ft (3m) with Plug
NEMA 6-50P
Work Lead 10ft (3m) with work clamp
Regulator/Flowmeter – Argon Mix Gases
Tweco Weldskill MIG Gun 200 Amp, 10ft (3m)
Fitted Feed Roll for .023” - .030” (0.6 – 0.8mm) solid wire