09 included items, 10 optional accessories, 09 included items -5 2.10 optional accessories -5 – Tweco 210 MIG Thermal Arc Fabricator User Manual
Page 21: Fabricator 210
Advertising
FABRICATOR 210
Manual No. 0-4855
2-5
INTRODUCTION
2.09 Included Items
Fabricator 210 Power Source with Integrated Wirefeeder
Y
Factory Fitted Wheeling Kit
Y
Factory Fitted Single Cylinder Rack
Y
Factory Fitted Primary Power Cable 10 AWG, 10ft (3m) with Plug
NEMA 6-50P
Y
Work Lead 10ft (3m) with clamp
Y
Cable Stowage Hook
Y
Regulator / Flowmeter - Argon Mix Gases
Y
TWECO Weldskill MIG gun 250A, 15' (4.5m)
Y
Drive Roll for .035"/.045" (0.9mm/1.2mm) Hard Wire
Y
Fabricator 210 Package System Contents
Table 2-5: Power Supply Contents
2.10 Optional Accessories
Refer to the Appendix section for the list of available options and accessories.
Advertising